Bare Metal Servers

Bare metal servers give you a fully dedicated physical server located in our racks in a Tier 1 data center at one of our available locations.

Use bare metal servers to run your hypervisor or OS of choice, build an HA cluster, all on dedicated hardware with 10G networking.

Our data centers are climate controlled and have dual power feeds with generator backup to separate A and B power supplies on your server. This means that if one power feed or power supply fails, your server will keep running. We carry spare parts onsite and can change the configuration of your server as required by contacting the GT Edge ServiceDesk at any time.

Each bare metal server comes with unlimited Internet access with a static public IP. There are no egress bandwidth limits or fees. You get to use the entire port on your Internet facing network card (typically 1 Gigabit).  Just use your server and don´t worry about getting a large bandwidth cost on your bill each month.

To put together a configuration for your bare metal server follow the steps below. As always, feel free to open a ticket to set up a call and discuss your bare metal server needs with one of our Solution Architects. They will help you develop a configuration that will suit your workloads.

Select a chassis with enough drive bays to accommodate the amount of drive capacity you need and what you may need in the future. Note that you can mix and match drive types and models as needed. We have various size SSD, NVMe and HDD drives so that you can select the appropriate size and performance to suit your workloads. Whatever drives you decide to use, we can put them into a RAID 0, 1, 10 or 5 group for you as required when the server is built for you.

Use the dropdown menus to select the amount of RAM, OS, Hypervisor, network attached storage, Cloud connections and other items you may need.

Once you have put together a configuration, you can save it to your wishlist to view it again later. If you are satisfied with your configuration you can place an order with your credit card. Our custom bare metal servers are billed a month in advance. Discounts are available for 3, 6 and 12 month subscriptions.

The ServiceDesk will always review the configuration with you before building your bare metal server.